Allenheath GS1 SERVICE MANUAL Uživatelský manuál stáhnout pdf (Strana 10)

ALLEN & HEATH

10 S1SM1

Stage 2 - Removing the PCB.

side view

rear view

Refer to figure 4.

1. Remove the 8x screws (3) from the phono connectors along the rear panel.

2. Remove the locknut (5) from the front right stud.

3. Remove the nut (7) and shakeproof washer (8) from the front left stud.

4. Carefully ease the PCB off the 6 plastic snap-in supports (10) by squeezing together top of supports with

pliers or suitable tool.

Re-assembly is the reverse of the above procedure taking care to push PCB down over all plastic snap-in supports.

Figure 4.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Žádné komentáře

Allenheath GS1 SERVICE MANUAL Uživatelský manuál Strana 10